with
BISMILLAHHIRRAHMANIRRAHIM
INTRODUCTION
This is nearly to final step. Where i tried to test first the circuit as in simulation before install it as permanent in the real bord. To do so, i used breadbord and testing with 12V battery. In this method i also checked the current and voltage flow inside circuit by using multimeter. The purpose is known the power loss due the current flow, as the power is
P= IV
P=I^2R
P=V^2/R
INTRODUCTION
This is nearly to final step. Where i tried to test first the circuit as in simulation before install it as permanent in the real bord. To do so, i used breadbord and testing with 12V battery. In this method i also checked the current and voltage flow inside circuit by using multimeter. The purpose is known the power loss due the current flow, as the power is
P= IV
P=I^2R
P=V^2/R
INTRODUCTION
This is nearly to final step. Where i tried to test first the circuit as in simulation before install it as permanent in the real bord. To do so, i used breadbord and testing with 12V battery. In this method i also checked the current and voltage flow inside circuit by using multimeter. The purpose is known the power loss due the current flow, as the power is
CONSTRUCTION THE CIRCUIT ON BREADBOARD
In this week, I constructed the circuit on the breadboard that we get at magazine. Then put the component on the breadboard. After that, we test this circuit to see the our project is functioning or not.
 |
| overall circuit |
 |
| at side of the circuit |
 |
| trouble shoot and measure the circuit using multimeter |
 |
| circuit testing result using 12 v battery green indicator is used |
No comments:
Post a Comment