with
BISMILLAHIRRAHMANNIRRAHIM
INTRODUCTION
Being engineering for the future, he or she should understand what is the main purpose of the project was build for and its related to the current situations. Thus, the project and knowledge is not a waste after it done and ready to apply or sold.
As my supervisor advised to me to look and search about the current of car light technologies and the effect of its.
RESEARCH & STUDY THE SITUATION
1.0 PROBLEM STATEMENT
Traffic accidents in Malaysia have been increasing
at the average rate of 9.7% per annum over the last three (3) decades (Figure 1).
Compared to the earlier days, total number of road accidents had increased from
24,581 cases in 1974 to 328,264 cases in 2005, reaching more than 135% increase
of accident cases over 30 years. The number of fatalities (death within 30 days
after accident) also increased but at slower rate compared to total road
accident from 2,303 in 1974 to 6,200 in 2005. However the upward trend of
fatalities dropped in 1997 after Malaysia Government established a 5-year
national road safety target to reduce road accident deaths by 30% by the year 2000.
2.0 SURVEY
The survey is about to know the current situation in car technologies in Malaysia. The location survey is around Selayang, Selangor at buyong wokshop. the survey was taken about 10 minutes to complete the questioner
2.1 SURVEY RESULT
And
what is the purpose of survey is taken for this project?
Because of the
technologies inside those car are not same., such the engine system, hydraulic
system and light system.
and the light system will be focus on.
3.0 EXAMPLE OF LIGHT NEEDED ALERT
This is the example of car sensor system from Gentex company (Automotive product) for controlling car beam
 |
| camera sensor at back mirror |
the operation of beam controller from Gentex company
 |
| when facing others car at front side |
 |
| camera is detect light intensity |
 |
| opposite car was passing by |
 |
| high beam is maintain when no car is coming forward |
No comments:
Post a Comment